cantilever support
英 [ˈkæntɪliːvə(r) səˈpɔːt]
美 [ˈkæntɪliːvər səˈpɔːrt]
网络 单端支持; 悬臂支架; 悬臂座; 悬臂架
双语例句
- In-situ Monitoring Technology on Continuous Rigid Frame Cantilever Casting Beam Simple narration construction plan of cast-in-site with houseful support frame on continuous box grider
现浇连续箱梁满堂支架施工方案简述 - Wall crane is fixed to the wall cantilever crane, or may be along the wall or other support structure on the elevated track running cantilever crane.
壁上起重机是固定在墙壁上的悬臂起重机，或者可沿墙上或其他支承结构上的高架轨道运行的悬臂起重机。 - The electromagnetic support stiffness and additional damping parameters of the cantilever beam system with parallel electromagnetic and mechanical support were identified.
支撑刚度参数的识别值在静态工作点附近具有较高的精度，说明该电磁支撑可以实现机械系统变刚度支撑。 - Most cantilever bridges have two arms of truss structure that meet or support a section between them.
大多数悬臂桥都有两个桁架臂用以对接或支撑两臂之间的桥段。 - Design of Cantilever Agitating Shaft without Support
釜内无支承悬臂搅拌轴的设计 - Deep Foundation Pit Cantilever Bottling Pile Support Computer Aided Design
深基坑悬臂式灌注桩支护计算机辅助设计 - In this article, authors introduce the calculation process of single-node and multi-node method using equivalent beam model in cantilever support calculation of foundation pit support engineering. At the same time, an application of it in an actual project is presented.
介绍了基坑支护工程的悬臂支护计算中，在单质点和多质点计算方法中运用等值梁模型的计算步骤，并将其应用于实际工程中。 - This paper analyzes the success application influence factors about the roof caving technology of cantilever support and summarized it's main factors.
对影响悬移支架放顶煤技术成功应用因素进行了系统分析，并总结出了其主要影响因素。 - The deformation and ring beam binding forces of cantilever retaining pile for excavation support
深基坑无锚撑护壁桩变形状态及圈梁约束分析 - Techniques for Building the Head of Cantilever Support of Shengli 2
胜利二号钻井平台悬臂支架头部建造工艺 - In order to take into account the influence of distortion, the cantilever deck of single-cell box girder bridges is considered as cantilever plate with spring support at the root.
本文考虑箱梁畸变，按根部受弹性约束的单向变厚度板计算单室箱梁桥悬臂行车道板； - At the same time, cantilever piles are always used as the support structure considering of construction time.
考虑施工场地的时间进程，采用悬臂桩作为支档结构。 - The Machining and Election of the Cantilever Support Head for "Sheng Li 2" Drilling Platform
胜利二号悬臂支架头部机加工、船台合拢工艺 - For cantilever pile and pile-plate with single support structure, so long as the parameters are inputted, the program can automatically the strength, deformation and stability of the structures, and can output the engineering cost of the structures.
对于悬臂桩和单支点桩板支护结构，输入参数通过程序可自动验算结构的强度、变形和稳定性，并可输出结构工程造价。 - Because of start element of the bridge with higher headroom and longer cantilever, the support structures combined with underside bracket and upside suspend truss are used upon top of pillar body.
针对0号块净空高，悬臂长的特点，以墩身为依托采用了下部托架和上部吊架相结合的支撑架结构体系。 - Numerical Analogy on Horizontal Displacement Law of Cantilever Support Texture
悬臂式支护结构水平位移变化规律数值模拟 - Success Application Analysis of Roof Caving Technology of Cantilever Support
悬移支架放顶煤技术成功应用浅析 - This paper makes an analysis of the fault of cantilever support for auger and gives a new plan to adoptes sliding support for boosting the rolling bearing;
分析了螺旋叶片悬臂式支撑的缺点，提出了滑动支撑配合轴承支撑的新方案； - Finite element theory is devoted in the third chapter, and it is described of the solid model of the aluminum cantilever support parts and ideals of simplification in details.
第三章介绍了有限元理论，详细说明了铝合金支撑装置零部件的实体模型建立及简化思路。 - In chapter IV, the equivalent stress of aluminum alloy parts of cantilever support is analyzed by using finite element method.
本文第四章采用有限元法对接触网铝合金支撑装置零部件进行了等效应力分析。 - Researched the cantilever which provide stiffness, designed the cantilever support system.
对提供刚度的悬臂支承进行研究，并设计了悬臂支承系统。 - Cantilever pile is widely used in reinforcement to excavation and fill geotechnical engineering as a support structure with resistance to deep sliding because of its characteristics, such as strong resistance, reduction of land use, convenience and short-time spend about construction and so on.
悬臂桩作为一种深层抗滑支挡结构，因其具有抗滑能力强、节约建筑用地、施工便捷等优点，被广泛应用于加固岩土体切方及填方工程等领域。